Drying Solutions Ltd
Rexmoi® Air Tray Drying Technology. Low temperature cooking. Cooling product. Temperature range -5 to 70C. Energy efficient electrical refrigeration heat pump technology. Enclosed chamber. Stainless Steel construction. Tray styles to suit product. Designed to suit. PC recording of processed data. Plug and play.
The Rexmoi® Air Tray Dryer is a multipurpose tool, designed and made in NZ, with the ability to control temperature and humidity when drying various products, cooking at low temperatures, and controlled cooling of products.
The latest Rexmoi® Air Tray Dryer includes a heat recovery system which enables water to be heated.
Each Dryer is a sealed enclosed chamber, allowing control of the atmosphere within, using smart controls and refrigeration technology.
Air flow around the product is an important factor of how well the system works.
Different trolleys and trays and variable air flow are available to optimise this – drawer trays, flat wire trays, flat trays, bins.
Filters are used to keep the air clean in the chamber.
The Dryers are very energy efficient, costing approximately $1/hour to run for the standard unit depending on power costs. The standard Rexmoi® Dryer can remove up to 4.5 litres per kilowatt of power used, depending on temperature, humidity, time, and product.
It circulates its own air and does not introduce any outside air or discharge any product smells etc into the outside air, only water is released from the unit during drying.
The product can be checked at any stage during the drying process. Product can be dried to the level of moisture content you require, including drying to a stage ready for grinding up to a powder.
Recipes can be set up which allow for change of temperature, fan capacities, and drying speed; as well as time for changing these and stopping drying.
All the trays and the inside of the Dryers are all stainless steel.
The dryers are all set up to go as a plug and play unit. We have units available for hiring to trial the Dryers with your product.
PC Scada monitoring is available to data log the process of drying.
Currently Dryers are being used to dry petfood, fruit slices, mussels, and leaves for tea. Trials have been done for drying tomatoes, herbs, fish, various nuts, and for cooking meringues.
